Wd1029 Aliphatic Polyurethane Acrylate Prepolymer UV Resin Is Most Suitable for Vacuum Electroplated UV Paint and Has Good Plating Property

• Customization: Available
• Molecular Principal Chain: Carbon Chain Polymer
• Color: Clear to Light Yellow Transparent Liquid
• Model NO.: WD1029A
• After-Sale Service: Support
• Productivity: 50000 Tons
• Functionality: Two
• Free Samples: Support
• Viscosity: 10000-25000cps/60ºC
• Solid Content: 100%±2
• Application: Most Suitable for Vacuum Electroplating UV Paint.
• Characteristic: Alkali Resistance, Hand Sweat Resistance, High Cos
• Transport Package: Metal Drum
• Specification: 20kg/drum; 200kg/drum
• Trademark: according to requirements
• Origin: Guangdong, China
• HS Code: 3902900090

Product Description

Product Parameters

 

WD1029A	is a high viscosity bifunctional aliphatic polyamine ester, acrylic prepolymer,
functionality	two
Solid Content	100%± 2
Viscosity	10000-25000CPS/60 ºC
Appearance(25ºC)	clarified to light yellow transparent liquid
chromatic number	≤1#.Fe Co colorimetric method
characteristic	Fast reaction, good adhesion, good appearance, high viscosity, alkali resistance, hand sweat resistance, and high cost-effectiveness
Application	Applied to coatings such as plastic, metal, and wood, and high-performance vacuum electroplating for mobile phone shells UV primer
package	20KG net weight iron bucket and 200KG net weight iron bucket.
storage	The resin should be stored in a properly sealed container protected from light at 0-35ºC; Under this condition,the storage stability of this product should be at least 6 months;
secure	Irritating to eyes and skin: Skin contact may cause allergies: You should carefully read the Safety Data Sheet(MSDS):including relevant information on labeling,transportation, and storage Information, as well as relevant information on product use,product safety,and ecology.
pay attention to	Please wear protective gloves during operation to avoid contact with the skin; In case of accidental contact with skin and eyes Or clothing,please wash with soap and water(rinse eyes with plenty of water). For detailed instructions, please refer to Read the Material Safety Data Sheet

The data provided by this product is accurate and is used in conjunction with other company materials during use, and is not subject to our supervision. Therefore, our company does not assume any legal responsibility for the recommended products. Please test its adaptability in advance.


 

Detailed Photos

 

Packaging & Shipping

 

Company Profile

Factory/Production Base




Experimental/Office Area




 

Certifications

 

FAQ

A.  Are we a factory or a trading company?

b.    It is a factory. Our company was founded in 2015, covering an area of 38000 square meters and equipped with advanced automated production equipment. The annual production capacity of synthetic resin is 50000 tons

A.  Is the test sample free of charge?
b.    The samples are free, you only need to pay for shipping

A. What is the minimum order quantity?
b.    Minimum order quantity: 200 kilograms, preferably 1 ton (1 ton is cheaper)
       Note: The minimum quantity of orders depends on different types of materials. Please contact us.

A.  Can we accept OEM of the product?
b.    Yes, we can package according to your requirements, and both the packaging and labeling can be made for your brand.

A.  What is the delivery cycle?
b.    Delivery cycle - peak season: one month.    Delivery cycle - off-season: within 15 workdays
       Note (The specific delivery time is determined by the ordered product and quantity)