Customization: | Available |
---|---|
Molecular Principal Chain: | Carbon Chain Polymer |
Color: | White Liquid |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
WD4096 | WD4096 is a stereolithography resin designed for stereolithography (SLA) 3D printing. It is characterized by its suitability for various SLA machines, excellent printing stability, balanced performance after molding, and a durability of over 8 months. |
Density (g/cm ³ at 25ºC) | 1.07-1.12 |
Curing depth | 0.20 mm |
Viscosity (CPS/28 ºC) | 350±20 |
Appearance(25ºC) | White liquid |
Critical exposure (mJ/cm ²) | 9.3±0.5 |
Construction layer thickness | 0.15±0.03mm |
characteristic | It has wide adaptability and can be used in all mainstream SLA models on the market. 2: The resin has low viscosity, good fluidity, little residue, is easy to clean and has low loss. 3: Moderate reactivity, suitable for rapid printing. 4: Longer service life, no significant change in viscosity during long-term printing, and less likely to damage parts. 5: It has good strength and dimensional stability in a humid environment. 6: Small curing shrinkage and high printing accuracy. 7: It has good flexibility in the early stage of molding and is convenient for assembly. 8: It can be tapped. 9: The light becomes yellow and smaller. It has a temperature resistance of up to 55ºC and will not deform during transportation. |
Application | The production of master models, concept models, general components and functional components in fields such as automobiles, medical care and consumer electronics. |
package | 20KG net weight iron bucket and 200KG net weight iron bucket. |
storage | The resin should be stored in a properly sealed container protected from light at 0-35ºC; Under this condition,the storage stability of this product should be at least 12 months; |
secure | Irritating to eyes and skin: Skin contact may cause allergies: You should carefully read the Safety Data Sheet(MSDS):including relevant information on labeling,transportation, and storage Information, as well as relevant information on product use,product safety,and ecology. |
pay attention to | Please wear protective gloves during operation to avoid contact with the skin; In case of accidental contact with skin and eyes Or clothing,please wash with soap and water(rinse eyes with plenty of water). For detailed instructions, please refer to Read the Material Safety Data Sheet |
The mechanical properties of the cured material
Test project | Test method | value of number |
90-minute UV curing |
Hardness, Shore D | ASTM D 2240 | 91D |
Bending modulus, Mpa | ASTM D 790 | 2,772-2,825 |
Bending strength, Mpa | ASTM D 790 | 73 -78 |
Tensile modulus, MPa | ASTM D 638 | 2,339-2,467 |
Tensile strength, MPa | ASTM D 638 | 32 - 36 |
Fracture elongation rate | ASTM D 638 | 12 -16 % |
Notched impact strength | ASTM D 256 | 61 -70 |
Heat distortion temperature | ASTM D 648 @66PSI | 50 -61 |
Glass transition temperature, ºC | DMA,E"peak | 55 -57 |
Density, g/cm ³ | 1.09 |
The data provided by this product is accurate and is used in conjunction with other company materials during use, and is not subject to our supervision. Therefore, our company does not assume any legal responsibility for the recommended products. Please test its adaptability in advance.
Factory/Production Base
Experimental/Office Area
A. Are we a factory or a trading company?