Dual-Cured Polyurethane Acrylate UV Resin with Good Adhesion to Metal and Glass Is Suitable for Metal and Glass UV Coatings.

• Customization: Available
• Molecular Principal Chain: Carbon Chain Polymer
• Color: Slightly Yellowish Transparent Liquid.
• Model NO.: WD3329
• Solid Content: 95±2
• Viscosity: 1500-3500 Cps/25°
• Characteristic: Good Resistance to Boiling Water and Salt Spray.
• After-Sale Service: Support
• Application: Metal and Glass UV Coatings.
• Free Samples: Support
• Productivity: 50000 Tons
• Transport Package: Metal Drum
• Specification: 20kg/drum; 200kg/drum
• Trademark: according to requirements
• Origin: Guangdong, China
• HS Code: 3902900090

Product Description

Product Parameters

 

WD3329	WD3329 is a trifunctional dual-cured polyurethane acrylate resin. It is characterized by good adhesion to metal, glass and electroplated surfaces, low shrinkage rate and fast curing speed.
functionality	three
Solid Content	95±2
Viscosity	1500-3500CPS/25ºC
Acid value(mgKOH/g)	≤5.0
Appearance(25ºC)	Slightly yellowish transparent liquid.
Color value (Fe-Co)	≤2#
characteristic	It has good adhesion to metal, glass and electroplated surfaces, low shrinkage rate, fast curing speed, and good resistance to boiling water and salt spray.
Application	Suitable for metal and glass UV coatings and UV topcoats for hardware electroplating.
package	20KG net weight iron bucket and 200KG net weight iron bucket.
storage	The resin should be stored in a properly sealed container protected from light at 0-35ºC; Under this condition,the storage stability of this product should be at least 6 months;
secure	Irritating to eyes and skin: Skin contact may cause allergies: You should carefully read the Safety Data Sheet(MSDS):including relevant information on labeling,transportation, and storage Information, as well as relevant information on product use,product safety,and ecology.
pay attention to	Please wear protective gloves during operation to avoid contact with the skin; In case of accidental contact with skin and eyes Or clothing,please wash with soap and water(rinse eyes with plenty of water). For detailed instructions, please refer to Read the Material Safety Data Sheet

The data provided by this product is accurate and is used in conjunction with other company materials during use, and is not subject to our supervision. Therefore, our company does not assume any legal responsibility for the recommended products. Please test its adaptability in advance.

 

Packaging & Shipping

 

Factory/Production Base




Experimental/Office Area




 

Certifications

 

FAQ

A.  Are we a factory or a trading company?

b.    It is a factory. Our company was founded in 2015, covering an area of 38000 square meters and equipped with advanced automated production equipment. The annual production capacity of synthetic resin is 50000 tons

A.  Is the test sample free of charge?
b.    The samples are free, you only need to pay for shipping

A. What is the minimum order quantity?
b.    Minimum order quantity: 200 kilograms, preferably 1 ton (1 ton is cheaper)
       Note: The minimum quantity of orders depends on different types of materials. Please contact us.

A.  Can we accept OEM of the product?
b.    Yes, we can package according to your requirements, and both the packaging and labeling can be made for your brand.

A.  What is the delivery cycle?
b.    Delivery cycle - peak season: one month.    Delivery cycle - off-season: within 15 workdays
       Note (The specific delivery time is determined by the ordered product and quantity)