Epoxy Acrylate Oligomer UV Resin; High Hardness and Good Surface Drying. Suitable for UV Coatings, UV Inks, UV Vacuum Electroplating, etc.

• Customization: Available
• Molecular Principal Chain: Carbon Chain Polymer
• Functionality: Two
• Model NO.: CK1669
• Viscosity: 15000-30000cps/25ºC
• Characteristic: High Hardness and Good Surface Drying
• After-Sale Service: Support
• Application: UV Coatings, UV Inks, UV Vacuum Plating, etc.
• Free Samples: Support
• Productivity: 50000 Tons
• Transport Package: Metal Drum
• Specification: 20kg/drum; 200kg/drum
• Trademark: according to requirements
• Origin: Guangdong, China
• HS Code: 3902900090

Product Description

Product Parameters

 

CK1669	CK1669 is a modified epoxy acrylate oligomer with high hardness, good surface drying, fast reaction speed, good adhesion on common plastic and wood materials, good leveling and extremely low odor.
functionality	two
Solid Content	100%
Viscosity	15000-30000CPS/25ºC
Appearance(25ºC)	Transparent or slightly yellowish viscous liquid
chromatic number	≤1# (Fe Co colorimetric method)
characteristic	High hardness, good surface drying, fast reaction speed, good adhesion and relatively good boiling water resistance.
Application	It is suitable for UV coatings, UV inks, UV vacuum plating, etc.
package	20KG net weight iron bucket and 200KG net weight iron bucket.
storage	The resin should be stored in a properly sealed container protected from light at 0-35ºC; Under this condition,the storage stability of this product should be at least 6 months;
secure	Irritating to eyes and skin: Skin contact may cause allergies: You should carefully read the Safety Data Sheet(MSDS):including relevant information on labeling,transportation, and storage Information, as well as relevant information on product use,product safety,and ecology.
pay attention to	Please wear protective gloves during operation to avoid contact with the skin; In case of accidental contact with skin and eyes Or clothing,please wash with soap and water(rinse eyes with plenty of water). For detailed instructions, please refer to Read the Material Safety Data Sheet

The data provided by this product is accurate and is used in conjunction with other company materials during use, and is not subject to our supervision. Therefore, our company does not assume any legal responsibility for the recommended products. Please test its adaptability in advance.


 

 

Packaging & Shipping

 

Company Profile

Factory/Production Base




Experimental/Office Area




 

Certifications

 

FAQ

A.  Are we a factory or a trading company?

b.    It is a factory. Our company was founded in 2015, covering an area of 38000 square meters and equipped with advanced automated production equipment. The annual production capacity of synthetic resin is 50000 tons

A.  Is the test sample free of charge?
b.    The samples are free, you only need to pay for shipping

A. What is the minimum order quantity?
b.    Minimum order quantity: 200 kilograms, preferably 1 ton (1 ton is cheaper)
       Note: The minimum quantity of orders depends on different types of materials. Please contact us.

A.  Can we accept OEM of the product?
b.    Yes, we can package according to your requirements, and both the packaging and labeling can be made for your brand.

A.  What is the delivery cycle?
b.    Delivery cycle - peak season: one month.    Delivery cycle - off-season: within 15 workdays
       Note (The specific delivery time is determined by the ordered product and quantity)